Specifications

Product ID: 4800-IL

DIMENSIONS
Overall Length (hitch extended).................... 22' / 6.7 m
Overall Width...................................... 96" / 2.4 m
Overall Height (discharge installed)............... 100" / 2.54 m
Loading Height (top of side flare)................. 48" / 1.22 m
Hopper Width (floor)............................... 24" / 610 mm
Hopper Width (top of flare)........................ 40" / 1m
Hopper Length (top of flare)....................... 90" / 2.3 m

Weight
Gross ............................................ 9,900 lbs. / 4500 kg

Rotor
Diameter.......................................... 32" / 813 mm
Bearings.......................................... 2 ½" / 63.5 mm
Shaft............................................. 3" / 76.2 mm
Hammers........................................... 48
………7.25"/184 mm x 5.75"/146 mm x .5"/12.7 mm Pointed
Rotor Width....................................... 25" / 635 mm
Mass/Weight (w/Hammers)........................... 1730 lbs / 785 kg
Hammer Pins....................................... 4 - 1 ¼" / 31.75 mm Steel
Rotor Speed....................................... 1950 rpm

Hydraulic System
Pump, Pressure and Flow Compensating............... 45 L/12 gpm @ 2100 rpm
Reservoir Capacity................................. 98 L/26 Gallon
Pressure Gauge..................................... Standard
Relief Valve....................................... Standard

Production Capacity
Typical Yard Waste – up to 18-20 tons per hour
Wood Waste – up to 6.5-7 tons per hour
Wood Grinding Diameter............................. Up to 8" / 200 mm
Feed Roll Speed.................................... 0-30 rpm
Discharge Distance................................. Up to 25' / 7.6 m
Discharge Direction................................ 180 degrees

Controls
Discharge Chute Raise and Lower Deflector
Concave Adjustment for Particle Size
Two Sets of Replaceable or Removable Fingers
Feeder Assembly.................................. Variable Speed – Start/Stop
Hydraulics (Feed Stop)........................... On/Off
Heavy Duty Feed Roll............................. Forward/Stop/Reverse
Heavy Duty Feed Roll............................. Variable Speed
Emergency Stop Switch (2)
Under-speed Pause Control
High Pressure Feeder/Feed Roll Auto-Reverse

Engine
Model............................................ Kubota V3 Series (Mechanical Engine)
Aspiration…...................................... Turbo Charged – Liquid Cooled Diesel
Power............................................ 74 kW / 99 hp
Torque........................................... 325 ft-pd / 240 Nm @ 1600rpm
Emissions…..Tier 3/Stage III A Emissions

Accessories:
1) Oversized air cleaner w/ pre-cleaner
2) Shutdown Controls for the following:
a. Low Oil Pressure
b. High Coolant Temperature
3) Muffler w/rain cap

Fuel
Fuel Tank........................................ 170 L/45 gallons
Fuel Consumption (approximate)................... 15 L/hr/3 gph

DRIVE
Twin Disc – Over Center Clutch
Flexibox Coupling

TRAILER PACKAGE
Tandem Torflex Axles rated at 2722 kg/6000 lbs each
Electric Brakes Both Axles
DOT Compliant LED Trailer Light
Breakaway Brake Controls
Fully Adjustable and Removable Tongue

Download 4800-IL Specification Sheet


If you are interested in purchasing-leasing or service-distribution opportunities, click to contact Sundance Equipment